Thursday, September 29, 2011

DHCP server configuration on Linux.



This page is about configuring a dhcp3-server on a Debian system. You can install the service library with following command;



sudo atp-get install dhcp3-server


When you install dhcp3-server service, you will see dhcp3 directory in folder /etc. That directory contains dhcp3-server configuration file dhcpd.conf. My dhcp3-server service configuration file seems like this;


ddns-update-style none;
option domain-name "sample-dom.sample-com";
option domain-name-servers 172.28.202.143, 172.28.202.142;

default-lease-time 600;
max-lease-time 7200;

subnet 172.28.24.0 netmask 255.255.255.0 {
range 172.28.24.10 172.28.24.254;
option subnet-mask 255.255.255.0;
option broadcast-address 172.28.24.255;
option routers 172.28.24.1;
}

host printer {
hardware ethernet 00:26:73:04:08:3f;
fixed-address 172.28.24.37;
}

host printer1 {
hardware ethernet 00:00:f0:a6:ef:5b;
fixed-address 172.28.24.90;
}

host AccessPoint_Symbol {
hardware ethernet 00:A0:F8:A7:77:88;
fixed-address 172.28.24.70;
}
authoritative;

log-facility local7;


First 3 lines are abo ut dn s settings. You can set the domain in domain-name line and you can set dns servers on domai-name-servers line. You can also set multiple dns servers in a single line. If a client gets an ip address and never opens it for 7200 seconds, all information will be deleted for that client. So this date is called expiration date. subnet 172.28.24.0 netmask 255.255.255.0 part defines a scope between "{" and "}" characters. Scope properties are located between parentheses. For example, I want service to distribute ips only from the range of 172.28.24.10 and 172.28.24.254. I don't want the service to distribute ips from the range of 172.28.24.1 and 172.28.24.9. I also want to use this range to special purposes. And then, there are other options needed. subnet-mask, broadcast address and router address. Router address is usually called default gateway.

Host part is used for reservation. printer, printer1 and AccessPoint_Sympol parts are name of the reservations. You have to define a MAC address in a hardware ethernet line and you have to define some reserved ip addresses in fixed-address line. if you use "authoritative" line (you can delete it), all of the clients will record themself to dns server. The last line is just for defining the logging level.

Finally, you will need to start the service. You can use /etc/init.d/dhcp3-server shell script with start, stop, restart, force-reload or status options. If you execute that script without any parameter, it cats the possible options defined below:

/etc/init.d/dhcp3-server
Usage: /etc/init.d/dhcp3-server {start|stop|restart|force-reload|status}

No comments:

Post a Comment

Thanks